xyz軟體補給站

≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡
≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡
CSC FASTRAK V12.0 英文光碟正式版 (鋼結構設計軟體)
                ^^^^^^^^^^^^^^^^^^^^^^^^ 2006年05月最新版!

              For WIN 9x/WIN ME/WIN NT/WIN 2000/WIN XP/WIN 2003


                    原版光碟!!!全新單片裝!!!絕對超值!!!

  ２００６．０５．１０  全新〞光榮 〞上市      XYZ軟體補給站(cdmenu)
 ≒≒≒≒≒≒≒≒≒≒≒≒≒≒≒≒≒≒≒≒≒≒≒≒≒≒≒≒≒≒≒≒≒≒≒≒≒≒≒
本站網址:http://31.to/xyz

         CSC FASTRAK V12.0 英文光碟正式版 (鋼結構設計軟體)

相關網址:
http://www.tedds.com/

安裝說明:
安裝前請先嬝枝eymaker資料夾內Install.txt文件檔，即可完成安裝。

內容說明:

鋼結構設計軟體。

新版本特徵：

超級新格線/建造線特徵。
射線狀格線和交點的自動生成。
增強的載入分佈弁鄖洐?線及點的載入在複雜平板面內完全分解。
列的 '離網格'.：你不再需要將列旋轉在格線交點，列會自動放在模型的任何位置。



The most comprehensive steel building design tool available!

      Modelling

    * Simple 2d or 3d input of floors and frames for rapid model generation.
    * Create any arrangement of grid lines to help you input the structure 
      quickly and simply.
    * Import DXF drawing to automatically create grid lines.
    * Import architects' plans in DXF. The architectural drawing can be 
      'traced over' to generate the Fastrak model.
    * Create and work with beams, columns and slabs, handled as design 
      objects not analytical elements.
    * Import models from 3D+ or other 3d based systems, automatically 
      creating a Fastrak design model.
    * No practical limit to the geometry of the model.
    * Inclined beams, floors, complex roof structures, trusses etc - all 
      are modelled in Fastrak.
    * Floors can be tied by bracing or diaphragm action.
    * Frames can be rigid or braced with X, A, >, /, K etc.
    * Members can be any material including concrete and timber. 

      Design

    * Simple, composite with decking, composite with PC planks, continuous 
      and back-span beams.
    * Rolled sections, plated beams, Fabsec, Westok, Porthole, ASB's and 
      Slimflor beams.
    * Web openings with or without stiffeners.
    * Simple, concrete filled or rigid (moment) columns.
    * Frame stability from bracing and/or rigid frame design and/or concrete
      shear walls.
      
      Automatic Loading Facilities

    * Distribution of all loads including lines, concentrated, and partial area,
      to the supporting structure.
    * Directional wind load distribution.
    * Calculations of notional horizontal forces for the entire structure as 
      per BS 5950-1:2000 for sway and lack of fit.
    * Reduction of imposed loads per BS 6399. 

      Automatic Building Design

    * Detailed assessment of Lambda cr for the entire structure by inspection of
      every floor-to-floor drift of every column under the relevant notional 
      horizontal load case.
    * Comprehensive implementation of the assessment of floor vibration to SCI P076. 

        
      Continuous Beam Results

    * Detailed design output or design summaries for submission to checking 
      authorities, in Microsoft Word?format if required.
    * Beam end reactions and base reactions in Microsoft Excel?format or on
      drawings.
    * Detailed design drawings of plans and elevations, including beam end 
      reactions, floor slab reinforcement requirements, span direction, 
      etc - automatically layered on AutoCAD?drawings.
    * Full take off lists including steel and concrete material and floor 
      areas, in Microsoft Excel?if required.
    * Creation of 3d model for integration into 3D+? S-Frame? Orion and 
      a wide range of other modelling systems. 

      http://www.cscworld.com/fastrak/build_des.html                                                      


            XYZ軟體補給站 強力推薦！！！一定讓你值回票價，保證錯不了。
 ≒≒≒≒≒≒≒≒≒≒≒≒≒≒≒≒≒≒≒≒≒≒≒≒≒≒≒≒≒≒≒≒≒≒≒≒≒≒≒
                                         XYZ軟體補給站 目錄編輯 (cdmenu)

    最後，有句老話還是要再強調一次！XYZ製作的目錄，僅僅只是幫助您試用/選購各
    種應用軟體之用，如果您覺得這些試用的軟體真的對您工作上真正有幫助，敬請務
    必要買原版軟體，以支援作者或出版公司能再出版最好的軟體!!! 為了您將來的後
    續服務，更應該要購買原版的軟體！謝謝!!!
 ≒≒≒≒≒≒≒≒≒≒≒≒≒≒≒≒≒≒≒≒≒≒≒≒≒≒≒≒≒≒≒≒≒≒≒≒≒≒≒
 ≒≒≒≒≒≒≒≒≒≒≒≒≒≒≒≒≒≒≒≒≒≒≒≒≒≒≒≒≒≒≒≒≒≒≒≒≒≒≒