≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡ ≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡ Moldflow Design Link V5.0 英文光碟正式版 (在MPA軟體和優秀的CAD系統之間提供了幾何資料介面) ^^^^^^^^^^^^^^^^^^^^^^^^ 2005年02月最新版! For WIN 9x/WIN ME/WIN NT/WIN 2000/WIN XP/WIN 2003 原版光碟!!!全新單片裝!!!絕對超值!!! ２００５．０２．０１ 全新〞光榮 〞上市 XYZ軟體補給站(cdmenu) ≒≒≒≒≒≒≒≒≒≒≒≒≒≒≒≒≒≒≒≒≒≒≒≒≒≒≒≒≒≒≒≒≒≒≒≒≒≒≒本站網址:http://31.to/xyz
Moldflow Design Link V5.0 英文光碟正式版 (在MPA軟體和優秀的CAD系統之間提供了幾何資料介面) 相關網址: http://www.moldflow.com/stp/english/products/cad/cad_mdl.htm 安裝說明: 安裝前請先嬝林EGEND資料夾內install.txt文件檔，即可完成安裝。 內容說明: Moldflow Design Link(MDL) 能夠用於直接地輸入CAD幾何學模型於Moldflow Plastics Advisers及Plastics Insight中。通過使用標準的幾何格式，包括IGES, STEP和 Parasolid，還有允釭蔣翕擗JMPA的 Pro/ENGINEER 和 CATIA V5 模型檔，在MPA軟體 和優秀的CAD系統之間提供了幾何資料介面。 Moldflow Design Link Moldflow Design LinkT (MDLT) provides faster and easier access to CAD data by allowing users to import leading solid geometry formats directly into Moldflow Plastics Advisers (MPA), Moldflow Plastics Insight (MPI), and Moldflow Magics STL ExpertT software. This gives users the flexibility to accept CAD data from almost any source, and it also provides the added benefit of using native CAD data from all Parasolid-based CAD systems, Pro/ENGINEER, CATIA V5 and SolidWorks. MDL is commercially available in three versions: * MDL/Parasolid - for the import of Parasolid, SolidWorks, IGES, and STEP models * MDL/Pro/ENGINEER - for the import of Pro/ENGINEER part, IGES, and STEP models * MDL/CATIA V5 - for the import of CATIA V5 part models Capabilities When MDL is used with Moldflow Magics STL Expert software, the CAD solid model is converted to a STL model format which can then be fixed and optimized for use in a MPA or MPI analysis When MDL is used with MPA software, the CAD solid model is automatically converted to the MPA model format When MDL is used with MPI software, the CAD solid model can be automatically converted to the MPI mesh format, or the surfaces can be imported and subsequently meshed using MPI/Synergy's advanced meshing capabilities * Imported geometry is represented in MPI/Synergy as trimmed NURBS surfaces * These surfaces can be independently viewed, grouped, or meshed * NURBS surfaces are supported by the IGES, STEP, Parasolid, Pro/ENGINEER, CATIA V5, and SolidWorks file formats Supported Model Formats Parasolid file support - native Parasolid models created in any Parasolid-compatible CAD system, including Unigraphics, Solid Edge, IronCAD, and TopCad and saved in Parasolid versions up to and including version 16.0 Pro/ENGINEER file support - native Pro/ENGINEER part files created in versions up to and including Wildfire 2.0 CATIA V5 file support - native CATIA V5 part files created in versions up to and including V5R13 (Release 13) SolidWorks file support - native SolidWorks part models created in versions 2004 and 2005 STEP file support - STEP AP203 and STEP AP214 Class II, Class III, Class IV, Class V entities and Class VI entities and assemblies IGES file support - closed volume IGES files with an extended list of supported entities XYZ軟體補給站 強力推薦！！！一定讓你值回票價，保證錯不了。 ≒≒≒≒≒≒≒≒≒≒≒≒≒≒≒≒≒≒≒≒≒≒≒≒≒≒≒≒≒≒≒≒≒≒≒≒≒≒≒ XYZ軟體補給站 目錄編輯 最後，有句老話還是要再強調一次！XYZ製作的目錄，僅僅只是幫助您試用/選購各 種應用軟體之用，如果您覺得這些試用的軟體真的對您工作上真正有幫助，敬請務 必要買原版軟體，以支援作者或出版公司能再出版最好的軟體!!! 為了您將來的後 續服務，更應該要購買原版的軟體！謝謝!!! ≒≒≒≒≒≒≒≒≒≒≒≒≒≒≒≒≒≒≒≒≒≒≒≒≒≒≒≒≒≒≒≒≒≒≒≒≒≒≒ ≒≒≒≒≒≒≒≒≒≒≒≒≒≒≒≒≒≒≒≒≒≒≒≒≒≒≒≒≒≒≒≒≒≒≒≒≒≒≒
